Products aluminum & vinyl window manufacturing machines..

Aslan US1-550 automated upcut saws are designed to provide fast, easy, precise and safe cutting for vinyl, wood, aluminum and non-ferrous metals.
 
In US1-550 automated saw, the blade stays under the machine’s work table inside a closed cabin for safety. The access to the saw blade is possible only via a keyed door. A safety switch is installed at the blade door to make sure that the motor is powered only after the door is fully closed. And also, there is a safety switch at the top cover which allows the blade to come up only after the cover is fully closed and the material is clamped.
 
In US1-550 aluminum cutting saw, the saw blade moves up by a hydraulic and a pneumatic system. The operator has to press two buttons simultaneously to keep both hands away from the blade for safety. The rising speed of the blade is easy to set by a hydraulic speed controller on the front control panel.
 
Our US1-550 upcut saws can be used for both miter cuts and straight cuts.
 

Technical Features

● For smooth, precise, fast and easy cutting of aluminum profiles
● Can cut profiles at all angles from -75.0° to left and +75° to right
● Adjustable saw blade rising speed
● Adjustable fence for wider cutting capacity
● Multiple profile cutting at one sequence
● Safety guard for protection
● Double hand operation for safety
● Standard vertical pneumatic profile clamping system
● Single horizontal pneumatic profile clamping system
● Lighted cabin for increased visibility
● Top and bottom dust ports
● Easy to use control panel
● Standard hydro-pneumatic (oil and air) system for smooth cutting
● Spray mist cooling system for the blade
● Strong motor
● Special alloy aluminum table, strong sheet body and durable electrostatic paint
● Cast iron center
 

Standard Equipment

● Ø 550 mm (22 inch) saw blade installed.
● 2 pneumatic vertical clamps
● 2 pneumatic horizontal clamps
● 2 dust ports
● Air gun
● Spray mist system
 

Optional Equipment

● Conveyors
● Dust collector
● Second horizontal clamp
● Standalone clamp pressure adjusters for flexible profiles
 

Technical Specs

● Motor Power: 3 kw (4 hP) or 4 kw (5.4 hP)
● Voltages: 230 (3 phase), 460 (3 phase), 50/60 Hz.
● Rotation: 3000 rpm
● Blade Size: 550 mm (22 inch)
● Bore Diameter: 30 mm / 32 mm
● Air Pressure: 90-120 psi (6 - 9 Bar)
● Weight: 385 kg (850 lb)
● Dimensions (WxLxH): 99x108x157 cm (39x43x62 inch.)

Cutting Diagram

Product Video